chore: release client-v1.1.14

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Bupi8Kdqkfx2N5acFsHTx5

.gitea/workflows/deploy-client.yml

@@ -98,6 +98,9 @@ jobs:
   build-ios:
     needs: build-android
     runs-on: mac
+    # iOS TestFlight 上传易抖/易卡,按 CLAUDE.md「iOS 不阻塞发版」:本 job 失败
+    # 不拖垮整个 run,更不阻断下面的 release-deploy(它已改为只校验 4 个真实平台)。
+    continue-on-error: true
     env:
       PUB_HOSTED_URL: https://pub.flutter-io.cn
       FLUTTER_STORAGE_BASE_URL: https://storage.flutter-io.cn
@@ -159,6 +162,14 @@ jobs:
 
   release-deploy-client:
     needs: [build-client-web, build-macos, build-android, build-ios, build-windows]
+    # iOS(build-ios)故意可失败:只要 4 个真实平台成功就照常发布部署。
+    # always() 保证 build-ios 失败时本 job 不被跳过;再逐个校验其余平台必须成功。
+    if: >-
+      ${{ always()
+        && needs.build-client-web.result == 'success'
+        && needs.build-macos.result == 'success'
+        && needs.build-android.result == 'success'
+        && needs.build-windows.result == 'success' }}
     runs-on: mac
     env:
       GOPROXY: https://goproxy.cn,direct

CHANGELOG-client.md

@@ -5,6 +5,35 @@ All notable changes to this project will be documented in this file.
 The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
 and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
 
+## [1.1.14] - 2026-08-28
+
+### 改进
+- 商品价签（标签）版式优化：品名与下方字段在左栏居中排布，编号+度数一行、规格+日期一行，更整齐易读。
+- 去掉价签底部多余的米色页脚，一维条码与二维码放大填满纸面，扫码更清晰。
+
+## [1.1.13] - 2026-08-27
+
+### 改进
+- 扫码出库免按回车：扫码枪扫完商品二维码后自动加入明细，无需再手动敲一下回车。
+
+### 修复
+- 修复热敏打印机（得力等 TSPL 标签机）打印商品价签时字体重叠、且底部多出一行酒行名称的问题；现在热敏打印效果与屏幕预览完全一致，不再失真。
+
+## [1.1.12] - 2026-08-27
+
+### 改进
+- 商品价签（标签）改版为两栏布局：左侧品名 / 编号 / 度数规格 / 生产日期 / 一维条码，右侧二维码占满整个高度，扫码更清晰；字段间距与二维码大小均已优化。
+- 设置 →「打印模板 · 商品价签」的「预览」现可直接查看真实标签样式（此前为占位提示）。
+
+### 修复
+- 修复从「商品详情」和「基础数据」页打印标签时，生产日期不显示的问题（从入库 / 出库单打印此前已正常）。
+- 修复 Windows / macOS 版应用内更新时，下载进度条一直卡在 0% 的问题；现在能正常显示下载进度。
+
+## [1.1.11] - 2026-08-26
+
+### 修复
+- 修复 Windows 版因构建流程缺陷未包含「扫码出库」功能的问题；升级后 Windows 用户即可使用扫码枪扫码出库（macOS / 网页 / 安卓版此前已正常）。
+
 ## [1.1.10] - 2026-08-25
 
 ### 新功能

client/lib/core/config/app_config.dart

@@ -1,22 +1,20 @@
 /// 集中管理应用配置，通过 --dart-define=KEY=value 注入环境变量
 ///
-/// 开发默认值：http://localhost:8080
-/// 生产部署示例：flutter run \
-///   --dart-define=BASE_URL=http://192.168.1.100:8080 \
-///   --dart-define=SHOP_NAME=强朋友名酒行 \
-///   --dart-define=SHOP_ADDRESS=贵州省贵阳市云岩区中华北路88号 \
-///   --dart-define=SHOP_PHONE=0851-12345678
+/// 默认值 = 线上服务（jiu.51yanmei.com）：本地 flutter run 不带 define 也连生产。
+/// 需连本地后端时显式覆盖：flutter run \
+///   --dart-define=BASE_URL=http://localhost:8080 \
+///   --dart-define=PUBLIC_URL=http://localhost:8081
 class AppConfig {
   const AppConfig._();
 
   static const _baseUrl = String.fromEnvironment(
     'BASE_URL',
-    defaultValue: 'http://localhost:8080',
+    defaultValue: 'https://jiu.51yanmei.com',
   );
 
   static const _publicUrl = String.fromEnvironment(
     'PUBLIC_URL',
-    defaultValue: 'http://localhost:8081',
+    defaultValue: 'https://jiu.51yanmei.com',
   );
 
   static const shopName = String.fromEnvironment(

client/lib/core/update/app_updater_io.dart

@@ -26,13 +26,22 @@ Future<void> downloadAndInstall(
     String url, void Function(double) onProgress) async {
   final tmp = await getTemporaryDirectory();
   final dio = Dio();
+
+  // 关键：显式拒绝 gzip（Accept-Encoding: identity）。
+  // nginx 会对 application/octet-stream(.exe) 做即时 gzip，压缩响应走 chunked 传输、
+  // 不带 Content-Length，导致 onReceiveProgress 的 total 恒为 -1、进度卡在 0
+  //（macOS 的 .zip 属 application/zip 不被 gzip，故一直正常）。
+  // identity 让服务端回传原始字节 + Content-Length，total 才有效。
+  final dlOpts =
+      Options(headers: {HttpHeaders.acceptEncodingHeader: 'identity'});
+
   void prog(int r, int t) {
-    if (t > 0) onProgress(r / t);
+    if (t > 0) onProgress((r / t).clamp(0.0, 1.0));
   }
 
   if (Platform.isWindows) {
     final exe = '${tmp.path}\\jiu-update-setup.exe';
-    await dio.download(url, exe, onReceiveProgress: prog);
+    await dio.download(url, exe, onReceiveProgress: prog, options: dlOpts);
     // 启动 Inno Setup 安装包后退出本应用，让其覆盖安装。
     await Process.start(exe, const [], mode: ProcessStartMode.detached);
     await Future<void>.delayed(AppConstants.updaterStepDelay);
@@ -41,7 +50,7 @@ Future<void> downloadAndInstall(
 
   if (Platform.isMacOS) {
     final zip = '${tmp.path}/jiu-update.zip';
-    await dio.download(url, zip, onReceiveProgress: prog);
+    await dio.download(url, zip, onReceiveProgress: prog, options: dlOpts);
 
     final extractDir = '${tmp.path}/jiu-update';
     await Process.run('/bin/rm', ['-rf', extractDir]);

client/lib/core/utils/print_util_stub.dart

@@ -3,7 +3,7 @@ import 'dart:convert' show ascii;
 import 'dart:typed_data';
 import 'dart:ui' as ui;
 import 'dart:ffi';
-import 'package:charset_converter/charset_converter.dart';
+import 'package:barcode/barcode.dart' as bc;
 import 'package:ffi/ffi.dart';
 import 'package:win32/win32.dart'
     show
@@ -14,8 +14,7 @@ import 'package:win32/win32.dart'
         EndPagePrinter,
         EndDocPrinter,
         ClosePrinter,
-        DOC_INFO_1,
-        WideCharToMultiByte;
+        DOC_INFO_1;
 import 'package:flutter/foundation.dart'
     show kIsWeb, debugPrint, visibleForTesting;
 import 'package:flutter/services.dart';
@@ -48,8 +47,8 @@ String _fileTs() {
 
 // ── 设计色彩 token ──────────────────────────────────────────────────────────
 const _navy = PdfColor(0.122, 0.165, 0.227); // #1F2A3A  header/chip
-const _cream = PdfColor(0.957, 0.925, 0.847); // #F4ECD8  footer/reversed text
-const _footnote = PdfColor(0.353, 0.306, 0.208); // #5A4E35  footer text
+const _cream = PdfColor(0.957, 0.925, 0.847); // #F4ECD8  抬头反白店名
+const _footnote = PdfColor(0.353, 0.306, 0.208); // #5A4E35  编号 / 三字段小字
 const _ink = PdfColor(0.067, 0.067, 0.067); // #111     body text
 
 // ── 热敏标签 TSPL 裸发（桌面端：dart:ui 画扁平标签位图 → BITMAP → lp -o raw）────────
@@ -155,10 +154,13 @@ bool _winRawPrint(String printerName, Uint8List data) {
   }
 }
 
-/// 在 canvas 上画一行文字（黑色，单行不换行，CJK 走系统字体回退）
+/// 在 canvas 上画一行文字（默认黑色，单行不换行，CJK 走系统字体回退）
 void _drawText(
     ui.Canvas canvas, String s, double x, double y, double size, double maxW,
-    {bool bold = false, bool center = false}) {
+    {bool bold = false,
+    bool center = false,
+    ui.Color color = const ui.Color(0xFF000000)}) // ds-ignore: 纸面固定色(默认黑)
+{
   if (s.isEmpty) return;
   final pb = ui.ParagraphBuilder(ui.ParagraphStyle(
     fontSize: size,
@@ -167,13 +169,28 @@ void _drawText(
     maxLines: 1,
     ellipsis: '',
   ))
-    ..pushStyle(
-        ui.TextStyle(color: const ui.Color(0xFF000000))) // ds-ignore: 打印画布纸面固定色
+    ..pushStyle(ui.TextStyle(color: color)) // ds-ignore: 打印画布纸面固定色
     ..addText(s);
   final p = pb.build()..layout(ui.ParagraphConstraints(width: maxW));
   canvas.drawParagraph(p, ui.Offset(x, y));
 }
 
+/// 在 canvas 上把 [data] 画成 Code128 一维条码（黑条，铺满 x,y,w,h 区域，不带人读字符）。
+/// 扫码枪扫 1D 条码；条码内容 = 商品编号，与出库扫码一致。
+void _drawBarcode(
+    ui.Canvas canvas, String data, double x, double y, double w, double h) {
+  if (data.isEmpty) return;
+  final paint = ui.Paint()
+    ..color = const ui.Color(0xFF000000) // ds-ignore: 打印画布纸面固定色
+    ..style = ui.PaintingStyle.fill;
+  for (final e in bc.Barcode.code128().make(data, width: w, height: h)) {
+    if (e is bc.BarcodeBar && e.black) {
+      canvas.drawRect(
+          ui.Rect.fromLTWH(x + e.left, y + e.top, e.width, e.height), paint);
+    }
+  }
+}
+
 /// 测量单行文本在指定字号下的宽度
 double _measureWidth(String s, double size, bool bold) {
   final pb = ui.ParagraphBuilder(ui.ParagraphStyle(
@@ -196,6 +213,31 @@ double _fitFont(String s, double maxW, double maxH, bool bold, double cap) {
   return size;
 }
 
+/// 组装标签左列名下两行副字段（居中排布）：
+///   行1 = 编号 + 度数(型号)   行2 = 规格(版本) + 生产日期
+/// 2026-08-28 用户口径「编号和度数放一行、规格和日期放一行、居中」。
+/// 各字段为空则跳过（该行可只剩一个字段或整行消失）；日期截断到 10 字符。四路渲染共用。
+List<String> _labelSubFields(
+    String code, String? series, String? spec, String? productionDate) {
+  final date = (productionDate ?? '').isNotEmpty
+      ? (productionDate!.length > 10
+          ? productionDate.substring(0, 10)
+          : productionDate)
+      : '';
+  final line1 = [
+    if (code.isNotEmpty) code,
+    if ((series ?? '').isNotEmpty) series!,
+  ].join('    ');
+  final line2 = [
+    if ((spec ?? '').isNotEmpty) spec!,
+    if (date.isNotEmpty) date,
+  ].join('    ');
+  return [
+    if (line1.isNotEmpty) line1,
+    if (line2.isNotEmpty) line2,
+  ];
+}
+
 /// 用 dart:ui 把一张标签绘制成位图（热敏标签实际尺寸 40×20mm @203dpi）。
 /// 内部以 2× 超采样（640×320）绘制，转 TSPL 时再降采样，消除反锯齿模糊。
 /// 供 TSPL 裸发和预览渲染共用同一套画布逻辑，确保预览即实际输出。
@@ -203,9 +245,10 @@ Future<ui.Image> _renderLabelBitmap({
   required String shop,
   required String name,
   required String code,
-  required String degSpec,
-  required String date,
+  required List<String> subs, // 左列逐行副字段：型号规格 / 日期（已过滤空）
   required Uint8List qrBytes,
+  bool drawBarcode = true, // 热敏光栅路径置 false：条码改用原生 TSPL BARCODE 保证扫码
+  bool drawQr = true, // 热敏光栅路径置 false：二维码改用原生 TSPL BITMAP 保证扫码
 }) async {
   const w = 320, h = 160; // 40×20mm @203dpi（逻辑尺寸）
   const scale = 2; // 2× 超采样，内部以 640×320 绘制
@@ -214,122 +257,100 @@ Future<ui.Image> _renderLabelBitmap({
   final canvas =
       ui.Canvas(recorder, ui.Rect.fromLTWH(0, 0, sw.toDouble(), sh.toDouble()));
   canvas.scale(scale.toDouble(), scale.toDouble()); // 坐标系放大，后续坐标不变
+
+  // 纸面固定配色（对齐设计原型 devices.html 标签块）——预览为彩色设计稿，
+  // 热敏机为单色介质，实际打印时头/脚颜色会退化为黑白（TSPL 路径另行处理）。
+  const cWhite = ui.Color(0xFFFFFFFF); // ds-ignore
+  const cNavy = ui.Color(0xFF1F2A3A); // ds-ignore 深蓝店名头
+  const cCream = ui.Color(0xFFF4ECD8); // ds-ignore 抬头店名字色
+  const cInk = ui.Color(0xFF111111); // ds-ignore 正文
+  const cCode = ui.Color(0xFF333333); // ds-ignore 编号 / 三字段
+
   canvas.drawRect(ui.Rect.fromLTWH(0, 0, w.toDouble(), h.toDouble()),
-      ui.Paint()..color = const ui.Color(0xFFFFFFFF)); // ds-ignore: 打印画布纸面固定色
+      ui.Paint()..color = cWhite);
 
-  // 右侧二维码（解码后端 PNG 直接画上）
-  const qrS = 124.0;
-  const qrTop = 8.0;
-  const qrLeft = w - qrS - 4; // 192
-  try {
-    final codec = await ui.instantiateImageCodec(qrBytes);
-    final qrImg = (await codec.getNextFrame()).image;
-    canvas.drawImageRect(
-        qrImg,
-        ui.Rect.fromLTWH(0, 0, qrImg.width.toDouble(), qrImg.height.toDouble()),
-        const ui.Rect.fromLTWH(qrLeft, qrTop, qrS, qrS),
-        ui.Paint());
-  } catch (e) {
-    debugPrint('[label] QR 解码失败: $e');
+  // ── 深蓝店名头 ──────────────────────────────────────────────
+  const headerH = 24.0;
+  canvas.drawRect(
+      ui.Rect.fromLTWH(0, 0, w.toDouble(), headerH), ui.Paint()..color = cNavy);
+  _drawText(canvas, shop, 10, 5, 12, w - 20, bold: true, color: cCream);
+
+  // ── 主体两列布局（无页脚：主体直抵纸底，2026-08-27 删掉底部米色尺寸条）────────
+  const bodyTop = headerH; // 24
+  const double bodyBot = 160.0; // 直抵纸底 h（原到页脚顶 145），二维码/条码顺势放大
+  const padV = 6.0, padH = 8.0; // 收紧留白，给二维码腾空间
+  const double colGap = 6.0; // 左列与二维码列间距（原 10，收小）
+
+  // 右列：二维码略放大，占主体近满高（正方形），2026-08-28 用户口径「二维码调大一点」
+  const double qrPad = 1.0;
+  const double qrSize = (bodyBot - bodyTop) - 2 * qrPad; // 134
+  const double qrTop = bodyTop + qrPad; // 25
+  const double qrLeft = w - padH - qrSize; // 178
+  if (drawQr) {
+    try {
+      final codec = await ui.instantiateImageCodec(qrBytes);
+      final qrImg = (await codec.getNextFrame()).image;
+      canvas.drawImageRect(
+          qrImg,
+          ui.Rect.fromLTWH(
+              0, 0, qrImg.width.toDouble(), qrImg.height.toDouble()),
+          const ui.Rect.fromLTWH(qrLeft, qrTop, qrSize, qrSize),
+          ui.Paint());
+    } catch (e) {
+      debugPrint('[label] QR 解码失败: $e');
+    }
   }
-  // 扫码溯源：居中于二维码正下方
-  _drawText(canvas, '扫码溯源', qrLeft, qrTop + qrS + 2, 14, qrS, center: true);
 
-  // 左侧文字：固定字号 + 自适应行间距（与二维码上下对齐，行距均匀分配剩余空间）
-  const lx = 22.0;
-  const textMaxW = qrLeft - lx - 6; // 164
+  // 左列几何
+  const double leftX = padH; // 8
+  const double leftRight = qrLeft - colGap; // 172
+  const double leftW = leftRight - leftX; // 164
 
-  // 字号固定：只有商品名按宽度自适应，其余行均固定，杜绝自动放大
-  const double kShopSize = 17.0; // 酒行名，粗体
-  const double kSmallSize = 13.0; // 编号 / 度数 / 日期，统一小字
-  // 商品名：仅按宽度适配，上限 26px，下限 14px
+  // 左列底部一维条码（Code128，内容=商品编号），供扫码枪扫码出库
+  const double barH = 40.0;
+  const double barBottom = bodyBot - padV; // 154
+  const double barTop = barBottom - barH; // 114
+  if (drawBarcode) _drawBarcode(canvas, code, leftX, barTop, leftW, barH);
+
+  // 左列文字块：品名 + 两行副字段（行1=编号+度数、行2=规格+日期），整体水平居中、
+  // 竖直均分。2026-08-28 用户口径「编号和度数放一行、规格和日期放一行、字体在空白处居中」。
+  const double infoTop = bodyTop + padV; // 30
+  const double infoBot = barTop - 4; // 110
+  const double infoH = infoBot - infoTop; // 80
+
+  const double kSmallSize = 12.0; // 编号+度数 / 规格+日期
   final double nameSize =
-      _fitFont(name, textMaxW, 1000, true, 26.0).clamp(14.0, 26.0);
-
-  final codeText = code.isNotEmpty ? '编号：$code' : '';
+      _fitFont(name, leftW, 1000, true, 16.0).clamp(11.0, 16.0);
   final rows = <(String, double, bool)>[
-    if (shop.isNotEmpty) (shop, kShopSize, false), // 店名细体，突出商品名
-    if (name.isNotEmpty) (name, nameSize, true), // 商品名粗体
-    if (codeText.isNotEmpty) (codeText, kSmallSize, false),
-    if (degSpec.isNotEmpty) (degSpec, kSmallSize, false),
-    if (date.isNotEmpty) (date, kSmallSize, false),
+    if (name.isNotEmpty) (name, nameSize, true), // 品名粗体
+    for (final s in subs) (s, kSmallSize, false), // 编号+度数 / 规格+日期
   ];
-
-  // 文字区域：整体略低于二维码顶部，底部延伸至扫码溯源文字下方
-  const double kTextTop = 16.0; // 比二维码顶部(8)低一些，整体下移
-  const double kTextBot = 150.0; // 延伸至底部，减少留白
-  const double kLineH = 1.35; // 行高倍数（字号 × 行高 = 该行占用高度）
+  const double kLineH = 1.3; // 行高倍数
   final double totalTextH = rows.fold(0.0, (s, r) => s + r.$2 * kLineH);
   final int n = rows.length;
-  final double rawGap =
-      n > 0 ? (kTextBot - kTextTop - totalTextH) / (n + 1) : 4.0;
-  final double gap = rawGap < 1.5 ? 1.5 : rawGap;
-
-  double yy = kTextTop + gap;
+  final double rawGap = n > 0 ? (infoH - totalTextH) / (n + 1) : 2.0;
+  final double gap = rawGap < 1.0 ? 1.0 : rawGap;
+  double yy = infoTop + gap;
   for (final r in rows) {
-    _drawText(canvas, r.$1, lx, yy, r.$2, textMaxW, bold: r.$3);
+    _drawText(canvas, r.$1, leftX, yy, r.$2, leftW,
+        bold: r.$3, color: r.$3 ? cInk : cCode, center: true);
     yy += r.$2 * kLineH + gap;
   }
 
   return recorder.endRecording().toImage(sw, sh); // 返回 2× 图（640×320）
 }
 
-/// UTF-8 → GBK 字节：
-/// Windows 直接调 WideCharToMultiByte(936) FFI，无需插件；
-/// macOS 走 charset_converter（CoreFoundation 原生支持 GBK）。
-Uint8List _encodeGbk(String text) {
-  if (text.isEmpty) return Uint8List(0);
-  if (Platform.isWindows) {
-    final wideStr = text.toNativeUtf16();
-    try {
-      final needed = WideCharToMultiByte(
-          936, 0, wideStr, -1, nullptr, 0, nullptr, nullptr);
-      if (needed <= 1) return Uint8List(0);
-      final buf = calloc<Uint8>(needed);
-      try {
-        WideCharToMultiByte(
-            936, 0, wideStr, -1, buf.cast(), needed, nullptr, nullptr);
-        return Uint8List.fromList(buf.asTypedList(needed - 1)); // 不含 null 终止符
-      } finally {
-        calloc.free(buf);
-      }
-    } finally {
-      calloc.free(wideStr);
-    }
-  }
-  // macOS: charset_converter（同步 CoreFoundation）
-  // encode() 在 macOS 上是同步 channel 调用，此处以 Future.value 包装保持接口一致
-  throw UnsupportedError('call _encodeGbkAsync on macOS');
-}
-
-Future<Uint8List> _encodeGbkAsync(String text) async {
-  if (text.isEmpty) return Uint8List(0);
-  if (Platform.isWindows) return _encodeGbk(text);
-  return CharsetConverter.encode('GBK', text);
-}
-
-/// TSPL TEXT 命令辅助：将文本以 GBK 编码写入 BytesBuilder。
-/// TSS24.BF2/TSS16.BF2 是 TSC 固件内置简体中文点阵字体，需 GBK 编码。
-Future<void> _addTextCmd(
-    BytesBuilder buf, int x, int y, String font, String text) async {
-  if (text.isEmpty) return;
-  final gbk = await _encodeGbkAsync(text);
-  buf.add(ascii.encode('TEXT $x,$y,"$font",0,1,1,"'));
-  buf.add(gbk);
-  buf.add(ascii.encode('"\r\n'));
-}
-
-/// 桌面端把标签以 TSPL TEXT（内置中文点阵字体）+ QR BITMAP 混合方式裸发到热敏机。
-/// TEXT 走 TSS24.BF2/TSS16.BF2（GBK 编码，203 DPI 下比 TrueType 位图清晰数倍）。
-/// QR 仍走 BITMAP（内置 QRCODE 命令扫描不可靠）。
+/// 桌面端把整张标签「光栅化」成单色位图裸发到热敏机（TSPL BITMAP），令热敏输出与
+/// 预览画布 100% 一致——彻底消除内置点阵字（TSS16/24）与预览 TrueType 度量不一致
+/// 导致的字体重叠 / 失真。文字/抬头走光栅；条码(Code128)与二维码仍走原生
+/// BARCODE / BITMAP 命令保证扫码可靠（光栅化后细条/密码易糊）。
 /// 检测不到热敏机 -> 返回 false（交系统打印）；检测到则强制 TSPL，失败抛异常。
 /// [printerName] 非空时跳过自动检测直接使用，为空则走 _findThermalPrinter()。
 Future<bool> _printFlatLabelThermal({
   required String shop,
   required String name,
   required String code,
-  required String degSpec,
-  required String date,
+  required List<String> subs, // 度数 / 规格 / 日期（已过滤空）
   required Uint8List qrBytes,
   String? printerName,
 }) async {
@@ -338,17 +359,23 @@ Future<bool> _printFlatLabelThermal({
   debugPrint('[label] thermal printer = $printer');
   if (printer == null) return false;
 
-  // QR BITMAP: 124×124 dots, 右侧 x=192, y=8
-  const qrW = 124, qrH = 124;
-  const qrX = 192, qrY = 8;
-  const qrWBytes = (qrW + 7) >> 3; // 16 bytes/row
+  const w = 320, h = 160; // 40×20mm @203dpi（逻辑尺寸）
+  const wBytes = (w + 7) >> 3; // 40 bytes/row
 
-  // 将后端 256×256 QR PNG 缩放到 124×124 并转 1-bit
-  final codec = await ui.instantiateImageCodec(qrBytes,
-      targetWidth: qrW, targetHeight: qrH);
-  final qrImg = (await codec.getNextFrame()).image;
-  final qrBd = await qrImg.toByteData(format: ui.ImageByteFormat.rawRgba);
-  final qrRgba = qrBd!.buffer.asUint8List();
+  // ── 文字/抬头整幅光栅：复用预览画布（跳过条码+QR，二者改原生命令）─────────
+  // 画布内部 2× 超采样(640×320)，此处 2×2 盒式降采样 + 亮度 128 阈值二值化，边缘更干净。
+  final img = await _renderLabelBitmap(
+    shop: shop,
+    name: name,
+    code: code,
+    subs: subs,
+    qrBytes: qrBytes,
+    drawBarcode: false,
+    drawQr: false,
+  );
+  final bd = await img.toByteData(format: ui.ImageByteFormat.rawRgba);
+  final rgba = bd!.buffer.asUint8List();
+  final iw = img.width; // 640
 
   final buf = BytesBuilder();
   buf.add(ascii.encode(
@@ -356,10 +383,43 @@ Future<bool> _printFlatLabelThermal({
     'REFERENCE 0,0\r\nDENSITY 10\r\nSPEED 2\r\nCLS\r\n',
   ));
 
-  // QR BITMAP 命令
+  // 整幅文字位图（mode 0 覆写整版）：深蓝抬头→黑底反白，其余白底黑字，
+  // 均由亮度阈值自然还原，无需 REVERSE；bit 0=黑点，默认 0xFF=白。
+  buf.add(ascii.encode('BITMAP 0,0,$wBytes,$h,0,'));
+  for (int y = 0; y < h; y++) {
+    final row = Uint8List(wBytes)..fillRange(0, wBytes, 0xFF);
+    for (int x = 0; x < w; x++) {
+      int lum = 0;
+      for (int dy = 0; dy < 2; dy++) {
+        for (int dx = 0; dx < 2; dx++) {
+          final i = ((y * 2 + dy) * iw + (x * 2 + dx)) * 4;
+          final a = rgba[i + 3];
+          lum += a < 128
+              ? 255
+              : (0.299 * rgba[i] + 0.587 * rgba[i + 1] + 0.114 * rgba[i + 2])
+                  .round();
+        }
+      }
+      if (lum ~/ 4 < 128) row[x >> 3] &= ~(0x80 >> (x & 7));
+    }
+    buf.add(row);
+  }
+  buf.add(ascii.encode('\r\n'));
+
+  // ── 右列二维码（原生 BITMAP，避免光栅降采样糊码）：占主体整高、右对齐 ──
+  const qrW = 130, qrH = 130; // 2026-08-28 放大，对齐画布 QR（134）
+  const qrX = 320 - 8 - qrW; // 182
+  const bodyTop = 24, bodyBot = 160; // 无页脚：主体直抵纸底
+  const qrY = bodyTop + ((bodyBot - bodyTop) - qrH) ~/ 2; // 27
+  const qrWBytes = (qrW + 7) >> 3; // 13
+  final qrCodec = await ui.instantiateImageCodec(qrBytes,
+      targetWidth: qrW, targetHeight: qrH);
+  final qrImg = (await qrCodec.getNextFrame()).image;
+  final qrBd = await qrImg.toByteData(format: ui.ImageByteFormat.rawRgba);
+  final qrRgba = qrBd!.buffer.asUint8List();
   buf.add(ascii.encode('BITMAP $qrX,$qrY,$qrWBytes,$qrH,1,'));
   for (int yy = 0; yy < qrH; yy++) {
-    final row = Uint8List(qrWBytes)..fillRange(0, qrWBytes, 0xFF); // 默认白
+    final row = Uint8List(qrWBytes)..fillRange(0, qrWBytes, 0xFF);
     for (int xx = 0; xx < qrW; xx++) {
       final i = (yy * qrW + xx) * 4;
       final a = qrRgba[i + 3];
@@ -372,46 +432,23 @@ Future<bool> _printFlatLabelThermal({
   }
   buf.add(ascii.encode('\r\n'));
 
-  // "扫码溯源" 居中于 QR 正下方
-  // TSS16 CJK 每字 16 dots; 4字=64; QR 中心 x=192+62=254; 文字起始 x=254-32=222
-  await _addTextCmd(buf, 222, qrY + qrH + 2, 'TSS16.BF2', '扫码溯源');
-
-  // 左侧文字（x=4, 宽度至 x=186）
-  // TSS24.BF2: 24×24 点阵; TSS16.BF2: 16×16 点阵
-  const kFontL = 'TSS16.BF2'; // 小号（编号/度数/日期）
-  const kFontXL = 'TSS24.BF2'; // 大号（商品名，≤7字时使用）
-  final nameFont = name.runes.length <= 7 ? kFontXL : kFontL;
-  final nameH = nameFont == kFontXL ? 24 : 16;
-  final codeText = code.isNotEmpty ? '编号：$code' : '';
-
-  // (文本, 字体, 字符高度点数)
-  final rows = <(String, String, int)>[];
-  if (shop.isNotEmpty) rows.add((shop, kFontL, 16));
-  if (name.isNotEmpty) rows.add((name, nameFont, nameH));
-  if (codeText.isNotEmpty) rows.add((codeText, kFontL, 16));
-  if (degSpec.isNotEmpty) rows.add((degSpec, kFontL, 16));
-  if (date.isNotEmpty) rows.add((date, kFontL, 16));
-
-  // 在 y=8..150 区间均匀分布各行
-  const kTextTop = 8;
-  const kTextBot = 150;
-  const kTextX = 4;
-  final totalH = rows.fold(0, (s, r) => s + r.$3);
-  final n = rows.length;
-  final gapSize = n > 0
-      ? ((kTextBot - kTextTop - totalH) / (n + 1)).round().clamp(2, 20)
-      : 8;
-
-  int yPos = kTextTop + gapSize;
-  for (final r in rows) {
-    await _addTextCmd(buf, kTextX, yPos, r.$2, r.$1);
-    yPos += r.$3 + gapSize;
+  // ── 左列底部整幅一维条码（原生 BARCODE，Code128，内容=商品编号），narrow 自适应铺满居中 ──
+  const leftX = 8, leftRight = qrX - 6, leftW = leftRight - leftX; // 8..188, 180
+  const kBarH = 34;
+  const kBarY = bodyBot - 8 - kBarH; // 118
+  if (code.isNotEmpty) {
+    final estModules = 11 * code.length + 35; // Code128B 估算模块数(含起止校验)
+    final narrow = (leftW / estModules).floor().clamp(2, 4);
+    final barW = estModules * narrow;
+    final barX = (leftX + (leftW - barW) ~/ 2).clamp(leftX, leftRight - 10);
+    buf.add(ascii.encode(
+        'BARCODE $barX,$kBarY,"128",$kBarH,0,0,$narrow,$narrow,"$code"\r\n'));
   }
 
   buf.add(ascii.encode('PRINT 1,1\r\n'));
   final tspl = buf.toBytes();
 
-  debugPrint('[label] TEXT+BITMAP tspl ${tspl.length}B -> $printer');
+  debugPrint('[label] raster BITMAP+QR+BARCODE tspl ${tspl.length}B -> $printer');
   await _sendRaw(printer, tspl);
   return true;
 }
@@ -439,42 +476,24 @@ Future<void> printProductLabelImpl({
     const labelW = 40.0 * PdfPageFormat.mm;
     const labelH = 20.0 * PdfPageFormat.mm;
     const headerH = labelH * 0.20;
-    const footerH = labelH * 0.11;
 
-    final specVal = (spec ?? '').isNotEmpty ? spec! : '';
-    final seriesVal = (series ?? '').isNotEmpty ? series! : '';
-    // 度数(系列) + 规格 同一行
-    final degSpecVal =
-        [seriesVal, specVal].where((s) => s.isNotEmpty).join('    ');
-    final dateVal = (productionDate ?? '').isNotEmpty
-        ? (productionDate!.length > 10
-            ? productionDate.substring(0, 10)
-            : productionDate)
-        : '—';
+    // 底部平铺三字段：度数(型号) / 规格(版本) / 日期（口径与预览、TSPL 一致）
+    final subs = _labelSubFields(code, series, spec, productionDate);
 
     // 桌面端热敏机：直接画扁平标签位图 + TSPL 裸发（不走会多走纸的系统打印）
     if (await _printFlatLabelThermal(
         shop: shopName,
         name: name,
         code: code,
-        degSpec: degSpecVal,
-        date: dateVal == '—' ? '' : dateVal, // 无生产日期(商品详情)则不显示该行
+        subs: subs,
         qrBytes: qrBytes,
         printerName: printerName)) {
       return;
     }
 
-    final contact = [
-      if (shopAddress.isNotEmpty) shopAddress,
-      if (shopPhone.isNotEmpty) shopPhone,
-    ].join(' · ');
-    final footerLeft = contact.isNotEmpty ? contact : shopName;
-
-    // 标签生成时间
-    final now = DateTime.now();
-    final genTime =
-        '${now.year}-${now.month.toString().padLeft(2, '0')}-${now.day.toString().padLeft(2, '0')}'
-        ' ${now.hour.toString().padLeft(2, '0')}:${now.minute.toString().padLeft(2, '0')}';
+    // 商品名字号：随字数自适应（与预览一致，短名更大）
+    final double nameFs =
+        name.runes.length > 10 ? 6.5 : (name.runes.length > 7 ? 7.5 : 9.0);
 
     doc.addPage(pw.Page(
       pageFormat: const PdfPageFormat(labelW, labelH),
@@ -482,11 +501,11 @@ Future<void> printProductLabelImpl({
       build: (_) => pw.Column(
         crossAxisAlignment: pw.CrossAxisAlignment.stretch,
         children: [
-          // ── Header：酒行名称 ─────────────────────────────────────────────────
+          // ── Header：深蓝店名头 ────────────────────────────────────────────────
           pw.Container(
             height: headerH,
             color: _navy,
-            padding: const pw.EdgeInsets.symmetric(horizontal: 4),
+            padding: const pw.EdgeInsets.symmetric(horizontal: 5),
             alignment: pw.Alignment.centerLeft,
             child: pw.Text(shopName,
                 maxLines: 1,
@@ -500,96 +519,76 @@ Future<void> printProductLabelImpl({
                 )),
           ),
 
-          // ── Body ─────────────────────────────────────────────────────────────
+          // ── Body：左列(文字+条码) / 右列(二维码占整高) ─────────────────────────
           pw.Expanded(
             child: pw.Container(
               color: PdfColors.white,
-              padding: const pw.EdgeInsets.fromLTRB(4, 2, 4, 2),
+              padding: const pw.EdgeInsets.fromLTRB(4, 3, 4, 3),
               child: pw.Row(
-                crossAxisAlignment: pw.CrossAxisAlignment.center,
+                crossAxisAlignment: pw.CrossAxisAlignment.stretch,
                 children: [
+                  // 左列
                   pw.Expanded(
                     child: pw.Column(
-                      mainAxisAlignment: pw.MainAxisAlignment.center,
-                      crossAxisAlignment: pw.CrossAxisAlignment.start,
+                      crossAxisAlignment: pw.CrossAxisAlignment.stretch,
                       children: [
-                        // 商品名（过长自动缩小并最多两行）
-                        pw.Text(name,
-                            maxLines: 2,
-                            overflow: pw.TextOverflow.clip,
-                            style: pw.TextStyle(
-                                font: font,
-                                fontSize: name.runes.length > 10
-                                    ? 5.5
-                                    : (name.runes.length > 7 ? 6.5 : 7.5),
-                                fontWeight: pw.FontWeight.bold,
-                                color: _ink,
-                                letterSpacing: 0.3)),
-                        pw.SizedBox(height: 2.5),
-                        // 商品编号（度数上方）
+                        // 文字块：品名 + 两行副字段（行1=编号+度数、行2=规格+日期），整体居中。
+                        // 2026-08-28 用户口径「编号和度数放一行、规格和日期放一行、居中」。
+                        pw.Expanded(
+                          child: pw.Column(
+                            mainAxisAlignment: pw.MainAxisAlignment.center,
+                            crossAxisAlignment: pw.CrossAxisAlignment.center,
+                            children: [
+                              pw.Text(name,
+                                  textAlign: pw.TextAlign.center,
+                                  maxLines: 2,
+                                  overflow: pw.TextOverflow.clip,
+                                  style: pw.TextStyle(
+                                      font: font,
+                                      fontSize: nameFs,
+                                      fontWeight: pw.FontWeight.bold,
+                                      color: _ink,
+                                      letterSpacing: 0.3)),
+                              for (final s in subs) ...[
+                                pw.SizedBox(height: 2),
+                                pw.Text(s,
+                                    textAlign: pw.TextAlign.center,
+                                    maxLines: 1,
+                                    overflow: pw.TextOverflow.clip,
+                                    style: pw.TextStyle(
+                                        font: font,
+                                        fontSize: 5,
+                                        color: _footnote)),
+                              ],
+                            ],
+                          ),
+                        ),
+                        // 左列底部整幅一维条码（Code128，内容=商品编号），供扫码枪
                         if (code.isNotEmpty) ...[
-                          pw.Text('编号：$code',
-                              style: pw.TextStyle(
-                                  font: font, fontSize: 5.5, color: _ink)),
-                          pw.SizedBox(height: 1.5),
+                          pw.SizedBox(height: 3),
+                          pw.SizedBox(
+                            height: 13,
+                            child: pw.BarcodeWidget(
+                              barcode: pw.Barcode.code128(),
+                              data: code,
+                              drawText: false,
+                              color: _ink,
+                            ),
+                          ),
                         ],
-                        // 度数(系列) + 规格 同一行, 无字段名标签
-                        pw.Text(degSpecVal,
-                            style: pw.TextStyle(
-                                font: font, fontSize: 5.5, color: _ink)),
-                        pw.SizedBox(height: 1.5),
-                        // 生产日期（只显示日期，无标签）
-                        pw.Text(dateVal,
-                            style: pw.TextStyle(
-                                font: font, fontSize: 5.5, color: _ink)),
                       ],
                     ),
                   ),
                   pw.SizedBox(width: 4),
-                  // QR
-                  pw.Column(
-                    mainAxisAlignment: pw.MainAxisAlignment.center,
-                    children: [
-                      pw.SizedBox(
-                        width: 38,
-                        height: 38,
-                        child: pw.Image(qrImage, fit: pw.BoxFit.contain),
-                      ),
-                      pw.SizedBox(height: 1),
-                      pw.Text('扫码溯源',
-                          style: pw.TextStyle(
-                              font: font,
-                              fontSize: 3.5,
-                              color: PdfColors.grey600)),
-                    ],
+                  // 右列：二维码占主体整高（正方形）
+                  pw.AspectRatio(
+                    aspectRatio: 1,
+                    child: pw.Image(qrImage, fit: pw.BoxFit.contain),
                   ),
                 ],
               ),
             ),
           ),
-
-          // ── Footer ───────────────────────────────────────────────────────────
-          pw.Container(
-            height: footerH,
-            color: _cream,
-            padding: const pw.EdgeInsets.symmetric(horizontal: 4),
-            child: pw.Row(
-              mainAxisAlignment: pw.MainAxisAlignment.spaceBetween,
-              crossAxisAlignment: pw.CrossAxisAlignment.center,
-              children: [
-                pw.Flexible(
-                  child: pw.Text(footerLeft,
-                      maxLines: 1,
-                      overflow: pw.TextOverflow.clip,
-                      style: pw.TextStyle(
-                          font: font, fontSize: 3, color: _footnote)),
-                ),
-                pw.Text(genTime,
-                    style: pw.TextStyle(
-                        font: font, fontSize: 3, color: _footnote)),
-              ],
-            ),
-          ),
         ],
       ),
     ));
@@ -613,21 +612,12 @@ Future<void> printProductLabelImpl({
 /// 渲染标签预览图（PNG 字节），与实际热敏打印使用相同画布逻辑（所见即所得）。
 /// Web 平台或 qrBytes 为空时抛异常。
 Future<Uint8List> renderLabelPreviewImpl(LabelData label) async {
-  final specVal = (label.spec ?? '').isNotEmpty ? label.spec! : '';
-  final seriesVal = (label.series ?? '').isNotEmpty ? label.series! : '';
-  final degSpecVal =
-      [seriesVal, specVal].where((s) => s.isNotEmpty).join('    ');
-  final dateVal = (label.productionDate ?? '').isNotEmpty
-      ? (label.productionDate!.length > 10
-          ? label.productionDate!.substring(0, 10)
-          : label.productionDate!)
-      : '';
   final img = await _renderLabelBitmap(
     shop: label.shopName,
     name: label.name,
     code: label.code,
-    degSpec: degSpecVal,
-    date: dateVal,
+    subs: _labelSubFields(
+        label.code, label.series, label.spec, label.productionDate),
     qrBytes: label.qrBytes!,
   );
   final bd = await img.toByteData(format: ui.ImageByteFormat.png);

client/lib/core/utils/print_util_web.dart

@@ -1,6 +1,7 @@
 import 'dart:convert';
 import 'dart:js_interop';
 import 'dart:typed_data';
+import 'package:barcode/barcode.dart' as bc;
 import 'package:web/web.dart' as web;
 import '../../models/stock_in.dart';
 import '../../models/stock_out.dart';
@@ -35,21 +36,35 @@ Future<void> printProductLabelImpl({
 
   final specVal = (spec ?? '').isNotEmpty ? spec! : '';
   final seriesVal = (series ?? '').isNotEmpty ? series! : '';
-  // 度数(系列) + 规格 同一行
-  final degSpecVal = [seriesVal, specVal].where((s) => s.isNotEmpty).join('  ');
   final dateVal = (productionDate ?? '').isNotEmpty
       ? (productionDate!.length > 10
           ? productionDate.substring(0, 10)
           : productionDate)
-      : '—';
-  // 商品名过长时缩小字号（适当缩小，配合两行折行）
+      : '';
+  // 左列名下两行副字段（居中）：行1=编号+度数、行2=规格+日期（口径与预览、PDF、TSPL 一致）
+  // 2026-08-28 用户口径「编号和度数放一行、规格和日期放一行、字体在空白处居中」。
+  final line1 = [
+    if (code.isNotEmpty) code,
+    if (seriesVal.isNotEmpty) seriesVal,
+  ].join('    ');
+  final line2 = [
+    if (specVal.isNotEmpty) specVal,
+    if (dateVal.isNotEmpty) dateVal,
+  ].join('    ');
+  final subs = <String>[
+    if (line1.isNotEmpty) line1,
+    if (line2.isNotEmpty) line2,
+  ];
+  final subLines = subs.map((s) => '<div class="sub">$s</div>').join();
+  // 商品名过长时缩小字号
   final nameLen = name.runes.length;
-  final nameFontPt = nameLen > 11 ? 5.0 : (nameLen > 8 ? 5.8 : 6.5);
+  final nameFontPt = nameLen > 10 ? 7.0 : (nameLen > 7 ? 8.0 : 9.0);
 
-  final contactLine = [
-    if (shopPhone.isNotEmpty) shopPhone,
-    if (shopAddress.isNotEmpty) shopAddress,
-  ].join(' ');
+  // 一维条码（Code128，内容=商品编号）：矢量 SVG 内联，扫码枪扫码出库。
+  final barcodeSvg = code.isNotEmpty
+      ? bc.Barcode.code128()
+          .toSvg(code, width: 200, height: 46, drawText: false)
+      : '';
 
   final html = '''<!DOCTYPE html>
 <html>
@@ -58,77 +73,55 @@ Future<void> printProductLabelImpl({
 <link rel="preconnect" href="https://fonts.googleapis.com">
 <link href="https://fonts.googleapis.com/css2?family=Noto+Sans+SC:wght@400;700&family=IBM+Plex+Mono:wght@400&display=swap" rel="stylesheet">
 <style>
-/* 标签尺寸：38mm × 20mm，横向 */
-@page { size: 38mm 20mm; margin: 0; }
+/* 标签尺寸：40mm × 20mm，横向（对齐设计原型 devices.html 标签块）*/
+@page { size: 40mm 20mm; margin: 0; }
 * { box-sizing: border-box; margin: 0; padding: 0;
     -webkit-print-color-adjust: exact; print-color-adjust: exact; }
-body { width: 38mm; height: 20mm; overflow: hidden; background: #fff; }
+body { width: 40mm; height: 20mm; overflow: hidden; background: #fff; }
 
 .label {
-  width: 38mm; height: 20mm;
+  width: 40mm; height: 20mm;
   display: flex; flex-direction: column;
   font-family: "Noto Sans SC", "PingFang SC", "Microsoft YaHei", sans-serif;
   color: #111;
 }
 
-/* ── Header：酒行名称 3.5mm ── */
+/* ── Header：深蓝店名头 3.2mm ── */
 .hdr {
   background: #1f2a3a; color: #f4ecd8;
-  height: 3.5mm; flex-shrink: 0;
-  display: flex; align-items: center; justify-content: center;
-  padding: 0 1.5mm; overflow: hidden;
+  height: 3.2mm; flex-shrink: 0;
+  display: flex; align-items: center;
+  padding: 0 1.2mm; overflow: hidden;
 }
 .hdr-name {
-  font-size: 5.5pt; font-weight: 700; letter-spacing: 0.08em;
+  font-size: 6pt; font-weight: 700; letter-spacing: 0.05em;
   white-space: nowrap; overflow: hidden; text-overflow: ellipsis;
 }
 
-/* ── 中部：左侧商品信息 + 右侧二维码 ── */
+/* ── 主体：左列(文字+条码) / 右列(二维码占整高) ── */
 .middle {
-  flex: 1; display: flex; flex-direction: row; overflow: hidden;
+  flex: 1; min-height: 0; display: flex; gap: 0.8mm;
+  padding: 0.7mm 0.9mm; overflow: hidden;
 }
-
-/* 左：商品名 + 规格批次 */
+.left { flex: 1; min-width: 0; display: flex; flex-direction: column; }
 .info {
-  flex: 1; display: flex; flex-direction: column;
-  justify-content: center; padding: 0.8mm 1mm 0.5mm 1.5mm;
-  overflow: hidden;
+  flex: 1; min-height: 0; display: flex; flex-direction: column;
+  justify-content: center; align-items: center; gap: 0.6mm; overflow: hidden;
 }
-.product-name {
-  font-size: 6.5pt; font-weight: 700; line-height: 1.15;
-  display: -webkit-box; -webkit-box-orient: vertical; -webkit-line-clamp: 2;
-  overflow: hidden; word-break: break-all;
-  margin-bottom: 0.6mm;
+.pname {
+  font-weight: 700; text-align: center; line-height: 1.1; max-width: 100%;
+  white-space: nowrap; overflow: hidden; text-overflow: ellipsis;
 }
-.specs {
-  display: flex; flex-direction: column; gap: 0.5mm;
+.sub {
+  font-size: 5pt; color: #333; line-height: 1.15; text-align: center;
+  max-width: 100%; white-space: nowrap; overflow: hidden; text-overflow: ellipsis;
 }
-.spec-row {
-  display: flex; gap: 0.8mm; align-items: baseline;
-  font-size: 4pt; white-space: nowrap; overflow: hidden;
-}
-.lbl { color: #999; flex-shrink: 0; }
-.val { font-family: "IBM Plex Mono", monospace;
-       overflow: hidden; text-overflow: ellipsis; }
+.bc { flex-shrink: 0; height: 4.6mm; }
+.bc svg { width: 100%; height: 100%; display: block; }
 
-/* 右：二维码 */
-.qr-wrap {
-  width: 16mm; flex-shrink: 0;
-  display: flex; flex-direction: column;
-  align-items: center; justify-content: center; gap: 0.3mm;
-  padding: 0.3mm 0.3mm 0.3mm 0;
-}
-.qr-wrap img { width: 14.5mm; height: 14.5mm; object-fit: contain; }
-.qr-cap { font-size: 3pt; color: #aaa; letter-spacing: 0.1em; }
-
-/* ── Footer：联系方式 3mm ── */
-.ftr {
-  background: #f4ecd8; height: 3mm; flex-shrink: 0;
-  display: flex; align-items: center; justify-content: center;
-  padding: 0 1.5mm;
-  font-size: 3.5pt; color: #5a4e35; overflow: hidden; white-space: nowrap;
-  text-overflow: ellipsis;
-}
+/* 右：二维码占主体整高（正方形）*/
+.qr { flex-shrink: 0; height: 100%; aspect-ratio: 1; }
+.qr img { width: 100%; height: 100%; object-fit: contain; display: block; }
 </style>
 </head>
 <body>
@@ -139,21 +132,18 @@ body { width: 38mm; height: 20mm; overflow: hidden; background: #fff; }
   </div>
 
   <div class="middle">
-    <div class="info">
-      <div class="product-name" style="font-size:${nameFontPt}pt">$name</div>
-      <div class="specs">
-        <div class="spec-row"><span class="val">$degSpecVal</span></div>
-        <div class="spec-row"><span class="val">$dateVal</span></div>
+    <div class="left">
+      <div class="info">
+        <div class="pname" style="font-size:${nameFontPt}pt">$name</div>
+        $subLines
       </div>
+      <div class="bc">$barcodeSvg</div>
     </div>
-    <div class="qr-wrap">
+    <div class="qr">
       <img src="data:image/png;base64,$base64Img" />
-      <div class="qr-cap">扫码溯源</div>
     </div>
   </div>
 
-  <div class="ftr">${contactLine.isNotEmpty ? contactLine : shopName}</div>
-
 </div>
 <script>
   if (document.fonts && document.fonts.ready) {

client/lib/screens/devices/device_management_screen.dart

@@ -9,8 +9,11 @@ import 'package:flutter/material.dart';
 import 'package:flutter_riverpod/flutter_riverpod.dart';
 import 'package:intl/intl.dart';
 import 'package:lucide_icons_flutter/lucide_icons.dart';
+import 'package:qr_flutter/qr_flutter.dart';
 
 import '../../core/auth/auth_state.dart';
+import '../../core/utils/print_util.dart' show LabelData;
+import '../../widgets/label_preview_dialog.dart';
 import '../../core/responsive/responsive.dart';
 import '../../core/theme/app_dims.g.dart';
 import '../../core/theme/context_tokens.dart';
@@ -932,8 +935,9 @@ class _DeviceManagementScreenState
   // ── 区块 C：打印模板（静态两卡，仅桌面；拍板移动端无打印）────
   Widget _tplGrid(dynamic t) {
     final cards = [
-      _tplCard(
-          t, LucideIcons.tag, '标签模板 · 商品价签', '40×30mm · 品名 / 规格 / 条码 / 零售价'),
+      _tplCard(t, LucideIcons.tag, '标签模板 · 商品价签',
+          '40×20mm · 店名 / 品名 / 编号 / 度数规格 / 生产日期 / 二维码 + 底部整幅一维条码',
+          onPreview: _previewLabelTemplate),
       _tplCard(t, LucideIcons.receiptText, '小票模板 · 出库单据',
           '58mm 热敏 · 抬头 / 明细 / 合计 / 经手人'),
     ];
@@ -944,7 +948,8 @@ class _DeviceManagementScreenState
     ]);
   }
 
-  Widget _tplCard(dynamic t, IconData icon, String name, String desc) {
+  Widget _tplCard(dynamic t, IconData icon, String name, String desc,
+      {VoidCallback? onPreview}) {
     return Container(
       padding: const EdgeInsets.all(16),
       decoration: BoxDecoration(
@@ -980,7 +985,8 @@ class _DeviceManagementScreenState
               const SizedBox(height: 8),
               Row(children: [
                 DsButton('预览',
-                    small: true, onPressed: () => _snack('模板预览即将上线')),
+                    small: true,
+                    onPressed: onPreview ?? () => _snack('模板预览即将上线')),
                 const SizedBox(width: 8),
                 DsButton('编辑',
                     small: true, onPressed: () => _snack('模板编辑即将上线')),
@@ -992,6 +998,35 @@ class _DeviceManagementScreenState
     );
   }
 
+  // ── 标签模板预览：用示例数据 + 本地二维码，走真实标签渲染 ────
+  Future<void> _previewLabelTemplate() async {
+    final shop = ref.read(shopInfoProvider).valueOrNull;
+    // 本地生成一张示例二维码（与真实标签同一渲染路径，仅数据是示例）。
+    final painter = QrPainter(
+      data: 'https://jiu.51yanmei.com/p/sample',
+      version: QrVersions.auto,
+      gapless: true,
+    );
+    final img = await painter.toImageData(240);
+    if (!mounted || img == null) return;
+    final label = LabelData(
+      qrBytes: img.buffer.asUint8List(),
+      name: '示例·贵州茅台',
+      code: 'P0001',
+      series: '飞天',
+      spec: '500ml',
+      productionDate: '2024-05-18',
+      shopName: shop?.name ?? '示例酒行',
+      shopAddress: shop?.address ?? '',
+      shopPhone: shop?.phone ?? '',
+    );
+    if (!mounted) return;
+    showAppDialog(
+      context: context,
+      builder: (_) => LabelPreviewDialog(labels: [label]),
+    );
+  }
+
   // ── 外设增删（店级 custom_fields.peripherals）───────────────
   Future<void> _savePeripherals(List<Peripheral> items) async {
     final shop = await ref.read(shopInfoProvider.future);

client/lib/screens/products/product_detail_screen.dart

@@ -987,6 +987,7 @@ class _QRCodeDialogState extends ConsumerState<_QRCodeDialog> {
       code: p.code,
       spec: p.spec,
       series: p.series,
+      productionDate: p.productionDate,
       shopName: shopInfo?.name ?? '',
       shopAddress: shopInfo?.address ?? '',
       shopPhone: shopInfo?.phone ?? '',

client/lib/screens/stock_out/stock_out_form_screen.dart

@@ -185,6 +185,8 @@ class _StockOutFormScreenState extends ConsumerState<StockOutFormScreen> {
   Map<String, _PickerItem> _codeIndex = {};
   String _lastScanCode = '';
   int _lastScanMs = 0;
+  // 扫码枪=HID键盘极快连打字符后停顿；停顿 120ms 无新输入即自动触发，免手动回车。
+  Timer? _scanDebounce;
 
   static const _fields = ['qty', 'sale'];
 
@@ -265,6 +267,7 @@ class _StockOutFormScreenState extends ConsumerState<StockOutFormScreen> {
     _remarkCtrl.dispose();
     _partnerFocus.dispose();
     _warehouseFocus.dispose();
+    _scanDebounce?.cancel();
     _scanCtrl.dispose();
     _scanFocus.dispose();
     for (final item in _items) {
@@ -354,6 +357,7 @@ class _StockOutFormScreenState extends ConsumerState<StockOutFormScreen> {
   /// 扫码枪回车触发。解析编码→本地整仓索引命中（已加载项）→未命中再走服务端
   /// 按编码精确查（覆盖库存超本地加载上限 1000 的大仓）→加行/累加数量。
   Future<void> _onScan(String raw) async {
+    _scanDebounce?.cancel();
     // 立即清空并保持聚焦，承接下一次扫码
     _scanCtrl.clear();
     _scanFocus.requestFocus();
@@ -697,6 +701,14 @@ class _StockOutFormScreenState extends ConsumerState<StockOutFormScreen> {
                   controller: _scanCtrl,
                   focusNode: _scanFocus,
                   hintText: '扫码枪扫码…',
+                  onChanged: (v) {
+                    // 扫码枪整串打完会停顿，停顿 120ms 视为一次完整扫入 → 自动触发。
+                    // 带回车后缀的枪仍走 onSubmitted，_onScan 内 300ms 同码去重防重复入单。
+                    _scanDebounce?.cancel();
+                    if (v.trim().isEmpty) return;
+                    _scanDebounce = Timer(
+                        const Duration(milliseconds: 120), () => _onScan(v));
+                  },
                   onSubmitted: _onScan,
                   suffix: Icon(LucideIcons.scanLine,
                       size: 16, color: context.tokens.muted),

client/lib/widgets/product_editor_drawer.dart

@@ -733,6 +733,8 @@ class _ProductEditorDrawerState extends ConsumerState<_ProductEditorDrawer> {
       code: p.code,
       series: (p.series ?? '').isEmpty ? null : p.series,
       spec: (p.spec ?? '').isEmpty ? null : p.spec,
+      productionDate:
+          (p.productionDate ?? '').isEmpty ? null : p.productionDate,
       remark: (p.remark ?? '').isEmpty ? null : p.remark,
       shopName: shopInfo?.name ?? '',
       shopAddress: shopInfo?.address ?? '',

client/pubspec.lock

@@ -26,7 +26,7 @@ packages:
     source: hosted
     version: "2.13.1"
   barcode:
-    dependency: transitive
+    dependency: "direct main"
     description:
       name: barcode
       sha256: "7b6729c37e3b7f34233e2318d866e8c48ddb46c1f7ad01ff7bb2a8de1da2b9f4"

client/pubspec.yaml

@@ -34,6 +34,7 @@ dependencies:
   lucide_icons_flutter: ^3.1.14+2
   # 购买卡 render_type=qr 内嵌二维码（纯 Dart，全平台安全，无原生依赖）
   qr_flutter: ^4.1.0
+  barcode: ^2.2.9
   # Web 端去 URL # 前缀（usePathUrlStrategy），Flutter SDK 内置包
   flutter_web_plugins:
     sdk: flutter

design/CONTRACT.md

@@ -210,7 +210,7 @@ AppTokens 目前**仅颜色**。原型还驱动：
 > - T7 体检结论：`node tools/fidelity.mjs inventory stock-in stock-out finance` 12 屏×主题全绿（数值见块 4 对应行，均 ≤ 各屏阈值，阈值本身 ≤8% 铁律线）；移动侧对应 8 个 golden 自比测试文件全绿；手册核查 `web/content/docs.md`/`docs/manual/user-manual.html` 均未见与「出入库默认显示/状态筛选」「财务筛选」冲突的既有描述，按红线不新增描述，本轮手册未改动。
 >
 > **设备/设置/用户/关于 已知差异（2026-07-02 Phase2 第 6-8 屏）**：
-> - 设备：外设设备=登记式本地存档（店级 `custom_fields.peripherals`，无真实连接协议），测试打印/配置/模板预览为占位 toast；打印模板静态两卡。
+> - 设备：外设设备=登记式本地存档（店级 `custom_fields.peripherals`，无真实连接协议），测试打印/配置为占位 toast；打印模板静态两卡。**价签模板「预览」已升为真实弹窗**（`ovLabel`，2026-08）：40×20mm 热敏价签 = 深蓝店名头 + **主体两列**（左列：品名居中·编号紧随其后小字 → 下方度数/规格/日期三字段平铺一行[两侧留边距，外白 > 中白] → 底部整幅一维条码 Code128[内容=商品编号，供扫码枪扫码出库]；右列：二维码占主体整高正方形）+ 米色页脚（店名 + 40×20mm）。去「扫码溯源」文案。对应客户端四路渲染（canvas 预览 / TSPL 热敏 / PDF 兜底 / Web HTML）已同步落地此布局；**热敏为单色介质**，深蓝头/米色脚在 TSPL 上退化为「黑底反白店名」「白底黑字页脚」（REVERSE 命令），布局一致。
 > - 设置：子导航比原型多「编号规则」（真实功能保留）；门店卡多 Logo 行；授权卡保留降级说明；偏好即时生效无「保存」按钮；原型「系统参数」假设置删除。
 > - 用户：独立页挂 `/settings/users`（原型导航同样高亮系统设置）；角色四级（后端为准），原型 settings 预览三级口径弃用；授权数据 settings/about 同源 licenseProvider（原型两处数字不一致）。
 > - 关于：旧版 帮助文档/扫码防伪/系统信息 卡删除，构建号并入版本 cell；更新日志走 `/public/release`（与官网时间线同源），接口不可达回退只显当前版本。

design/prototype/screens/devices.html

@@ -60,6 +60,22 @@
   .tpl-name{font-size:var(--fs-body); font-weight:700; color:var(--heading);}
   .tpl-desc{font-size:var(--fs-xs); color:var(--muted); margin-top:3px; line-height:1.4;}
   .tpl-acts{display:flex; gap:8px; margin-top:10px;}
+
+  /* ---- 标签预览（40×20mm 热敏价签：抬头 + 商品信息/二维码 + 底部整幅一维条码，无页脚）----
+     打印纸面为固定专色（navy 抬头 / 墨黑正文），不随 App 主题切换，故按 ds-allow 豁免。 */
+  .lbl-wrap{display:flex; flex-direction:column; align-items:center; gap:14px;}
+  .lbl-preview{width:340px; height:170px; border:1px solid var(--border); border-radius:var(--r-md); overflow:hidden; display:flex; flex-direction:column; box-shadow:var(--sh-2); background:#fff; color:#111;} /* ds-allow 打印纸面固定色 */
+  .lbl-hdr{height:26px; flex:none; display:flex; align-items:center; padding:0 10px; font-size:13px; font-weight:700; letter-spacing:.05em; background:#1f2a3a; color:#f4ecd8;} /* ds-allow 打印纸面固定尺寸 */
+  .lbl-mid{flex:1; min-height:0; display:flex; gap:6px; padding:6px 8px;}
+  .lbl-left{flex:1; min-width:0; display:flex; flex-direction:column;}
+  .lbl-info{flex:1; min-height:0; display:flex; flex-direction:column; justify-content:center; align-items:center; gap:5px;}
+  .lbl-name{font-size:18px; font-weight:700; white-space:nowrap; overflow:hidden; text-overflow:ellipsis; text-align:center; max-width:100%;} /* ds-allow 打印纸面固定尺寸 */
+  .lbl-sub{font-size:11px; color:#333; white-space:nowrap; overflow:hidden; text-overflow:ellipsis; line-height:1.15; text-align:center; max-width:100%;} /* ds-allow 打印纸面固定尺寸；名下两行居中 */
+  .lbl-bc{flex:none; height:46px; margin-top:4px;}
+  .lbl-bc img{width:100%; height:100%; display:block; object-fit:fill;}
+  .lbl-qr{flex:none; height:100%; aspect-ratio:1;}
+  .lbl-qr img{width:100%; height:100%; display:block; object-fit:contain;}
+  .lbl-note{max-width:340px; font-size:var(--fs-sm); color:var(--muted); line-height:1.6; text-align:center;}
   /* 设计期返回悬浮球（右下角，非侵入） */
   .ds-fab{position:fixed; right:22px; bottom:22px; width:44px; height:44px; border-radius:50%; background:var(--surface); color:var(--muted); border:1px solid var(--border); display:flex; align-items:center; justify-content:center; box-shadow:var(--sh-2); z-index:var(--z-fab); opacity:.6; transition:opacity .18s,color .18s,border-color .18s,transform .18s,box-shadow .18s; text-decoration:none;}
   .ds-fab:hover{opacity:1; color:var(--primary); border-color:var(--primary); box-shadow:var(--sh-3); transform:translateY(-2px);}
@@ -96,9 +112,9 @@
           <div class="tpl-prev"><svg viewBox="0 0 24 24"><use href="#i-ic12"/></svg></div>
           <div class="tpl-body">
             <div class="tpl-name">标签模板 · 商品价签</div>
-            <div class="tpl-desc">40×30mm · 品名 / 规格 / 条码 / 零售价</div>
+            <div class="tpl-desc">40×20mm · 店名 / 品名 / 编号 / 度数规格 / 生产日期 / 二维码 + 底部整幅一维条码</div>
             <div class="tpl-acts">
-              <div class="btn ghost sm" onclick="toast('打开标签模板预览（原型）')"><svg viewBox="0 0 24 24"><use href="#i-eye"/></svg>预览</div>
+              <div class="btn ghost sm" onclick="openLabelPreview()"><svg viewBox="0 0 24 24"><use href="#i-eye"/></svg>预览</div>
               <div class="btn ghost sm" onclick="toast('编辑标签模板（原型）')"><svg viewBox="0 0 24 24"><use href="#i-edit"/></svg>编辑</div>
             </div>
           </div>
@@ -137,6 +153,31 @@
   <div class="modal-foot"><div class="btn ghost" onclick="closeOverlay('ovAdd')">取消</div><div class="btn primary" onclick="closeOverlay('ovAdd'); toast('设备已添加并连接（原型）✓')">保存并连接</div></div>
 </div></div>
 
+<!-- 标签模板预览：40×20mm 热敏价签（二维码溯源 + 底部整幅一维条码，扫码枪扫码出库） -->
+<div class="overlay" id="ovLabel"><div class="modal" style="width:420px">
+  <div class="modal-head"><h3>标签模板 · 商品价签</h3><svg class="x" viewBox="0 0 24 24" stroke-width="2" onclick="closeOverlay('ovLabel')"><use href="#i-close"/></svg></div>
+  <div class="modal-body">
+    <div class="lbl-wrap">
+      <div class="lbl-preview">
+        <div class="lbl-hdr">岩美酒行</div>
+        <div class="lbl-mid">
+          <div class="lbl-left">
+          <div class="lbl-info">
+            <div class="lbl-name">飞天茅台</div>
+            <div class="lbl-sub">P1297&nbsp;&nbsp;&nbsp;&nbsp;53°</div>
+            <div class="lbl-sub">500ml&nbsp;&nbsp;&nbsp;&nbsp;2023-05-18</div>
+          </div>
+            <div class="lbl-bc"><img alt="一维条码 P1297" src="data:image/svg+xml;base64,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" /></div>
+          </div>
+          <div class="lbl-qr"><img alt="二维码" src="data:image/png;base64,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" /></div>
+        </div>
+      </div>
+      <div class="lbl-note">40×20mm 热敏价签：二维码溯源 + 底部整幅一维条码（Code128，内容=商品编号，供扫码枪扫码出库）。原型为示意布局，实际由客户端热敏/PDF/Web 三路渲染。</div>
+    </div>
+  </div>
+  <div class="modal-foot"><div class="btn ghost" onclick="closeOverlay('ovLabel')">关闭</div></div>
+</div></div>
+
 <div class="toast" id="toast"></div>
 
 <script src="shell.js"></script>
@@ -206,6 +247,7 @@ function openAdd(){ document.getElementById('addKind').textContent='标签打印
 function pickKind(e){ openMenu(e.currentTarget, KINDS.map(v=>({v,label:v,sel:document.getElementById('addKind').textContent===v})), v=>{ document.getElementById('addKind').textContent=v; closeMenus(); }); }
 function pickConn(e){ openMenu(e.currentTarget, CONNS.map(v=>({v,label:v,sel:document.getElementById('addConn').textContent===v})), v=>{ document.getElementById('addConn').textContent=v; closeMenus(); }); }
 function closeOverlay(id){ document.getElementById(id).classList.remove('show'); }
+function openLabelPreview(){ document.getElementById('ovLabel').classList.add('show'); }
 
 
 

scripts/ci/compile-ios.sh

@@ -102,11 +102,26 @@ echo "==> compile-ios: built ${IPA}"
 # TestFlight 是 App Store 独立分发渠道,上传本身易抖(重复 build 号 / ASC 临时错误);
 # 其失败【不应阻断】web/mac/win/android 的整体发版(见 CLAUDE.md「iOS ... 不阻塞」)。
 # IPA 已产出,上传失败仅告警,可稍后用 altool/Transporter 手动补传同一 IPA。
-echo "==> compile-ios: uploading to TestFlight"
-if xcrun altool --upload-app -f "$IPA" -t ios \
+# altool 上传是【静默】的:上传 IPA 到 Apple 期间数分钟无任何输出。网络到 Apple
+# 抖动/变慢时会长时间挂住 → 超过 runner 僵尸超时(10min)整个 job 被 SIGKILL 判
+# 失败,连下面的软失败分支都跑不到 → 阻断发版(1.1.13 就这么挂的)。
+# 本机无 timeout(1)/gtimeout(1)(无 coreutils),故用后台看门狗:超 UPLOAD_TIMEOUT
+# 先 TERM 再 KILL,保证上传永远在僵尸窗口内【干净收尾】,失败只告警不阻断。
+UPLOAD_TIMEOUT=420
+echo "==> compile-ios: uploading to TestFlight (超时保护 ${UPLOAD_TIMEOUT}s)"
+xcrun altool --upload-app -f "$IPA" -t ios \
   --apiKey "${KEY_ID}" \
-  --apiIssuer "${ISSUER}"; then
+  --apiIssuer "${ISSUER}" &
+altool_pid=$!
+( sleep "$UPLOAD_TIMEOUT"
+  kill -TERM "$altool_pid" 2>/dev/null || true
+  sleep 5
+  kill -KILL "$altool_pid" 2>/dev/null || true ) &
+watchdog_pid=$!
+if wait "$altool_pid"; then
   echo "==> compile-ios: done — uploaded build ${BUILD} to TestFlight"
 else
-  echo "!! compile-ios: TestFlight 上传失败(build ${BUILD}),不阻断发版;IPA=${IPA} 已产出,可稍后手动补传。" >&2
+  echo "!! compile-ios: TestFlight 上传失败或超时(build ${BUILD}),不阻断发版;IPA=${IPA} 已产出,可稍后手动补传。" >&2
 fi
+kill "$watchdog_pid" 2>/dev/null || true
+wait "$watchdog_pid" 2>/dev/null || true

scripts/ci/deploy-client.sh

@@ -29,17 +29,69 @@ rm -rf /tmp/jiu-web-new
 mkdir -p /tmp/jiu-web-new
 tar -xzf dist/web.tar.gz -C /tmp/jiu-web-new --strip-components=1
 
-setup_ssh
-echo "==> deploy-client: uploading files to ${TARGET_HOST}"
-${SCP} "$VERSION_YAML" "${TARGET_USER}@${TARGET_HOST}:/tmp/version.yaml"
-rsync -avz --delete -e "ssh -i ~/.ssh/ec2_deploy.pem -o StrictHostKeyChecking=no" \
-  /tmp/jiu-web-new/ "${TARGET_USER}@${TARGET_HOST}:/tmp/jiu-web-new/"
+# --- 版本一致性校验（发版前，本地产物）--------------------------------------
+# 部署错版事故的通用防线：确认将要上线的产物版本 == 本次发版 tag 版本。
+#   ① version.yaml 的 version:（后端 /version 与官网下载页实时读它）
+#   ② Flutter web 产物 version.json 的 version（自动更新客户端据此判断新版）
+# 任一不符即中止发版（exit 1），绝不把错版切上线。
+TAG_VER="$(ver_from_tag "$TAG")"
+# 解析器均把路径经 argv 传入、用 chr(34)/chr(39) 规避引号字面量，免嵌套引号踩坑。
+YAML_VER="$(python3 -c 'import sys
+for line in open(sys.argv[1], encoding="utf-8"):
+    if line.startswith("version:"):
+        print(line.split(":", 1)[1].strip().strip(chr(34)).strip(chr(39))); break' "$VERSION_YAML")"
+WEB_VER="$(python3 -c 'import json,sys; print(json.load(open(sys.argv[1], encoding="utf-8")).get("version", ""))' /tmp/jiu-web-new/version.json 2>/dev/null || echo '')"
+echo "==> deploy-client: 版本校验 tag=${TAG_VER} version.yaml=${YAML_VER} web=${WEB_VER}"
+if [ "$YAML_VER" != "$TAG_VER" ]; then
+  echo "ERROR: version.yaml 版本(${YAML_VER}) != 发版 tag(${TAG_VER})，中止发版。" >&2
+  exit 1
+fi
+if [ -n "$WEB_VER" ] && [ "$WEB_VER" != "$TAG_VER" ]; then
+  echo "ERROR: Flutter web 产物版本(${WEB_VER}) != 发版 tag(${TAG_VER})，中止发版。" >&2
+  exit 1
+fi
 
-# Desktop / mobile installers (served from /downloads/ by nginx). Guarded —
-# may be absent in a partial manual deploy.
-[ -f dist/jiu-windows-x64-setup.exe ] && ${SCP} dist/jiu-windows-x64-setup.exe "${TARGET_USER}@${TARGET_HOST}:/tmp/jiu-windows-x64-setup.exe" || true
-[ -f dist/jiu-macos-x64.zip ] && ${SCP} dist/jiu-macos-x64.zip "${TARGET_USER}@${TARGET_HOST}:/tmp/jiu-macos-x64.zip" || true
-[ -f dist/jiu-android.apk ] && ${SCP} dist/jiu-android.apk "${TARGET_USER}@${TARGET_HOST}:/tmp/jiu-android.apk" || true
+setup_ssh
+RSYNC_SSH="ssh -i ~/.ssh/ec2_deploy.pem -o StrictHostKeyChecking=no"
+
+# 经隧道推文件到 ali 偶发中断,大安装包尤甚(见 client-v1.1.10 run #362 的
+# Deploy → Ali 失败:android 83M scp 传到一半连接 reset,整个 job 挂 14min)。
+# 用 rsync --partial(断点续传)+ 重试替代 scp:断了从断点续传、不整段重来。
+# 单文件推送,重试 5 次;安装包已压缩(apk/zip/exe)故不加 -z。
+push_file() {  # push_file <local-file> <remote-abs-path>
+  local src="$1" dst="$2" i
+  for i in 1 2 3 4 5; do
+    if rsync -av --partial --timeout=120 -e "$RSYNC_SSH" \
+         "$src" "${TARGET_USER}@${TARGET_HOST}:${dst}"; then
+      return 0
+    fi
+    echo "!! push_file: ${src} 传输中断(第 ${i}/5 次),5s 后 --partial 续传重试…" >&2
+    sleep 5
+  done
+  return 1
+}
+
+echo "==> deploy-client: uploading files to ${TARGET_HOST}"
+# version.yaml 承载版本号/更新日志,必达;5 次仍失败则 set -e 中止发版。
+push_file "$VERSION_YAML" /tmp/version.yaml
+
+# Flutter web 目录同步(--delete 保持一致;--partial 续传;重试 3 次)。web 是
+# 发版核心产物,3 次仍失败即中止(避免把不完整目录切上线)。
+web_ok=0
+for i in 1 2 3; do
+  if rsync -avz --delete --partial --timeout=120 -e "$RSYNC_SSH" \
+       /tmp/jiu-web-new/ "${TARGET_USER}@${TARGET_HOST}:/tmp/jiu-web-new/"; then
+    web_ok=1; break
+  fi
+  echo "!! web 同步中断(第 ${i}/3 次),5s 后 --partial 续传重试…" >&2; sleep 5
+done
+[ "$web_ok" = 1 ] || { echo "ERROR: web 同步 3 次均失败,中止发版。" >&2; exit 1; }
+
+# Desktop / mobile installers(nginx 从 /downloads/ 提供)。文件缺失可跳过
+# (部分手动发版);传输 5 次仍失败仅告警不阻断 web/version 切换(下次发版补)。
+[ -f dist/jiu-windows-x64-setup.exe ] && { push_file dist/jiu-windows-x64-setup.exe /tmp/jiu-windows-x64-setup.exe || echo "!! windows 安装包 5 次仍失败,跳过。" >&2; } || true
+[ -f dist/jiu-macos-x64.zip ] && { push_file dist/jiu-macos-x64.zip /tmp/jiu-macos-x64.zip || echo "!! macos 安装包 5 次仍失败,跳过。" >&2; } || true
+[ -f dist/jiu-android.apk ] && { push_file dist/jiu-android.apk /tmp/jiu-android.apk || echo "!! android 安装包 5 次仍失败,跳过。" >&2; } || true
 
 ${SSH} "${TARGET_USER}@${TARGET_HOST}" << 'ENDSSH'
 set -e
@@ -64,6 +116,25 @@ rm -f /opt/jiu/downloads/jiu-windows-* /opt/jiu/downloads/jiu-macos-* /opt/jiu/d
 echo "Client deploy complete!"
 ENDSSH
 
+# --- 版本一致性校验（发版后，线上实测）--------------------------------------
+# 切换完成后实测线上 /version(后端每请求实时读 version.yaml)，确认真正上线的
+# 版本 == 发版 tag。不符即判定部署失败(exit 1)。域名 fronts 当前 active 机器。
+VERIFY_URL="${VERIFY_URL:-https://jiu.51yanmei.com}"
+LIVE_VER=""
+for i in 1 2 3 4 5; do
+  LIVE_VER="$(curl -fsS --max-time 15 "${VERIFY_URL}/version" 2>/dev/null \
+    | python3 -c "import json,sys; print(json.load(sys.stdin).get('version',''))" 2>/dev/null || echo '')"
+  [ "$LIVE_VER" = "$TAG_VER" ] && break
+  echo "!! 线上 /version=${LIVE_VER:-<空>} 尚未更新到 ${TAG_VER}(第 ${i}/5 次),3s 后重试…" >&2
+  sleep 3
+done
+if [ "$LIVE_VER" != "$TAG_VER" ]; then
+  echo "ERROR: 部署后线上 ${VERIFY_URL}/version 版本(${LIVE_VER:-<空>}) != 发版 tag(${TAG_VER})，部署失败。" >&2
+  teardown_ssh
+  exit 1
+fi
+echo "==> deploy-client: 线上版本校验通过 /version=${LIVE_VER}"
+
 teardown_ssh
 rm -rf /tmp/jiu-web-new
 echo "==> deploy-client: done"

scripts/ci/fetch-windows-staged.sh

@@ -35,6 +35,32 @@ MSG
   exit 1
 fi
 
+# --- client/ 子树 SHA 强校验（根因防线）---------------------------------------
+# winstage 的 GitHub Release 是**构建当时** github HEAD 上打的轻量 tag，只按版本名
+# 匹配无法保证它构建自本次发版的同一提交。历史事故(client-v1.1.10)：winstage-v1.1.10
+# 打在了扫码提交的父提交上 → 发出「版本号对但缺扫码功能」的错版 Windows 包。
+# 这里比对**发版提交**与**winstage 提交**的 `client/` 子树 SHA(git 内容寻址,同源提交
+# 必然同 tree)，不一致直接硬失败，逼迫先从发版提交重建 winstage，绝不发出错版。
+REL_TREE=$(git rev-parse HEAD:client)
+git fetch --depth=1 "https://x-access-token:${GH_TOKEN}@github.com/${GH_REPO}.git" \
+  "refs/tags/${STAGE_TAG}" >/dev/null 2>&1 || {
+  echo "ERROR: 无法从 GitHub 拉取 ${STAGE_TAG} 提交以校验 client/ 子树。" >&2
+  exit 1
+}
+WIN_TREE=$(git rev-parse FETCH_HEAD:client)
+if [ "$REL_TREE" != "$WIN_TREE" ]; then
+  cat >&2 <<MSG
+ERROR: ${STAGE_TAG} 的 Windows 包构建自**错误的提交**，client/ 子树与本次发版不一致：
+  发版提交(${TAG}) client/ tree = ${REL_TREE}
+  winstage 提交         client/ tree = ${WIN_TREE}
+  → winstage-v${VER} 是在别的提交上打的 tag，发出去会是「版本号对但代码错版」的包。
+  修复：在 GitHub 用**本次发版的提交**重建 Windows 包，再重跑发版：
+    gh workflow run windows.yml -f ver=${VER}    (仓库 ${GH_REPO}，确保其 main 已含本次发版提交)
+MSG
+  exit 1
+fi
+echo "==> fetch-windows-staged: client/ 子树校验通过（tree ${REL_TREE}），winstage 与发版同源。"
+
 # 取同名资产的 GitHub API asset url（用 Accept: octet-stream 拉二进制，302 跳 codeload，走 github.com 不过 frps）
 aid=$(printf '%s' "$info" | python3 -c "import sys,json; print(next((a['id'] for a in json.load(sys.stdin).get('assets',[]) if a['name']=='${NAME}'), ''))")
 if [ -z "$aid" ]; then

scripts/ci/release-client.sh

@@ -44,8 +44,13 @@ for line in raw.splitlines(keepends=True):
     if line.startswith('version:'):
         out.append('version: "%s"\n' % ver)
     elif line.startswith('build_number:'):
+        # build_number 由版本号公式派生(major*10000+minor*100+patch),与 pubspec
+        # 的 CFBundleVersion 同源、天然单调。旧法「读仓库 version.yaml +1」有 bug:
+        # CI/本地发版都不回写仓库那份,它永远冻结 → 每次都算出同一个值(见 1.1.9/1.1.10
+        # 均为 5 的历史)。改公式后无状态依赖,CI 与 local-release 结果一致。
         try:
-            b = int(line.split(':', 1)[1].strip()) + 1
+            _mj, _mn, _pt = (int(x) for x in ver.split('.')[:3])
+            b = _mj * 10000 + _mn * 100 + _pt
         except Exception:
             b = 1
         out.append('build_number: %d\n' % b)

scripts/local-release.sh

@@ -381,8 +381,12 @@ for line in raw.splitlines(keepends=True):
     if line.startswith('version:'):
         out.append('version: "%s"\n' % ver)
     elif line.startswith('build_number:'):
+        # build_number 由版本号公式派生(major*10000+minor*100+patch),与 pubspec
+        # 的 CFBundleVersion(BUILD)同源、天然单调。旧法「读仓库 version.yaml +1」有 bug:
+        # 仓库那份从不回写、永远冻结 → 每次都算出同一个值(1.1.9/1.1.10 均为 5)。
         try:
-            b = int(line.split(':', 1)[1].strip()) + 1
+            _mj, _mn, _pt = (int(x) for x in ver.split('.')[:3])
+            b = _mj * 10000 + _mn * 100 + _pt
         except Exception:
             b = 1
         out.append('build_number: %d\n' % b)